FUNCTION: H/T, °F/°C, MAX/MIN (°F/°C) MEMORY RECALLING FUNCTION

FEATURES:

ONE HOUR AUTO SHUT OFF HEAD MOVING OPERATION FOR ON/OFF SWITCHING 133MM. STAINLESS STEEL SENSOR PROBE MAX/MIN (°F/°C) MEMORY RECALLING TEMPERATURE UNIT °F/°C SELECTABLE DATA HOLD/TEST FUNCTION SELECTABLE 1 SEC. NORMAL TEMPERATURE SENSING TIME LOW BATTERY INDICATOR WITH NYLON STRAP

SPECIFICATION:

MEASUREMENT RANGE: [] -50°C ~ +150°C OR -58°F ~+302°F [] -50°C ~ +300°C OR -58°F ~+572°F RESOLUTION :0.1° FOR -19.9° ~ +199.9°, OTHERWISE 1° ACCURACY : []±1°C IN THE RANGE OF -30°C ~ +150°C []±1.8°F IN THE RANGE OF -22°F ~ +302°F []±1°C IN THE RANGE OF 151°C ~ +250°C, OTHERWISE MORE THAN ± 2°C []±1.8°F IN THE RANGE OF 303.8°F ~+482°F, OTHERWISE MORE THAN ± 4°F AMBIENT TEMPERATURE FOR PLASTIC CASING: -10°C ~ +50°C OR +14°F ~ +122°F BATTERY : 1 X 1.5V "AAA" SIZE OR EQUIVALENT

OPERATION:

EXTEND THE PROBE TO 45°/90°/135°/180°. THE THERMOMETER IS ON. ALL FUNCTIONS WILL SHOW ON THE DISPLAY. THE THERMOMETER IS READY FOR USE. PRESS THE "°C/°F" BUTTON TO SELECT DESIRED TEMPERATURE UNIT. IT WILLCHANGE IMMEDIATELY.. PRESS THE HOLD/TEST BUTTON TO "TEST" POSITION FOR TEMPERATURE MEASUREMENT OR "HOLD"POSITION TO RETAIN READING FOR RECORDING. THE WORD "HOLD" WILL FLASH ON THE DISPLAY TO INDICATE THE HOLDING POSITION. PRESS THE "MAX / MIN" BUTTON. "MIN" SIGN WILL BE SHOWN. THE MINIMUM TEMPERATURE TESTED WILL DISPLAY. PRESS THE BUTTON AGAIN. "MAX" SIGN WILL BE SHOWN. THE MAXIMUM TEMPERATURE TESTED WILL DISPLAY. IT WILL GO BACK TO THE TESTING POSITION AUTOMATICALLY AFTER THREE SECONDS.

PRECAUTIONS:

TO OBTAIN THE BEST RESULTS, THE PROBE TIP SHOULD BE IMMERSED AT LEAST 10MM. INTO THE TESTED SUBSTANCE. REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE THERMOMETER WILL NOT BE USEDFOR LONG DURATION OF TIME OR DURING STORAGE. THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.